Skip to the main content

TV Says No Signal but the Cable Box Is On? Check the TV's Input First

A cable box can be on and still not reach the TV: the TV is set to a different input, the HDMI cable is loose, or the box needs a restart. The order to check, from LG, Samsung and Roku.

By Erin5 min readNew

Checked for accuracy Published How we check

lamplighthome.com/articles/tv-no-signal-cable-box-on

Quick answer The TV is probably set to a different input than the one the box is plugged into. Press Input (Samsung: Source) on the TV remote and choose the HDMI port your cable box uses; if that doesn't bring the picture back, reseat the HDMI cable at both ends and restart the box by unplugging it.

LG lists the usual reasons a TV shows "No Signal": the box is turned off, a loose cable, or the TV set to a different input than the one the box is plugged into. A box with its light on can still fail to get a picture to the TV, and the makers' own steps narrow down why.

Why the box is on but the TV sees nothing

LG lists the usual reasons, and Samsung and Roku say the same:

  • The TV is on the wrong input. The box is plugged into HDMI 1, but the TV is set to HDMI 2.
  • A cable is loose or a port is damaged, so the picture never reaches the TV.
  • The box needs a restart. A light on the front doesn't mean it's sending a picture.
  • The signal coming into the box has a problem, which only your cable or satellite company can check.

Fix it in this order

  1. Press Input on the TV remote. On Samsung it's Source. On an LG remote without an Input button, LG says to press and hold the Home Hub button.
  2. Choose the HDMI port the box is plugged into. Not sure which one? Follow the cable from the box to the back of the TV. If your TV cycles through inputs, Roku says to pause about 10 seconds on each so the TV has time to detect the picture.
  3. Look for the live picture and the right channel number. That's LG's check that the input is right.
  4. Unplug the HDMI cable at both ends and plug it back in firmly. LG says to clear any debris from around the TV's HDMI port first.
  5. Try another HDMI port, or another cable. Roku and LG both suggest moving the cable to a different port on the same TV. Then choose that port's input.
  6. Restart the box. LG's steps: unplug the box's power adapter from the wall, wait about five seconds, and plug it back in. Then choose the input again.
  7. On a newer Samsung, test the cable. With the TV still set to the box's input, go to Settings > Support > Device Care > Self Diagnosis > Signal Information > HDMI Cable Test. Samsung says older models don't have it, and the test is meant for HDMI cables under 6 feet. If it says the cable is bad, replace the cable: the TV doesn't need service.

How to tell which part is the problem

Samsung's advice is to swap one thing at a time, a different device, port or cable, until you find the piece that isn't working:

  • Another device shows a picture on the same port and cable: Samsung says a picture in any other setup rules out the TV as the cause. Keep trying setups to identify the device or cable that isn't working; if it turns out to be a cable company's box, that means calling the cable company.
  • The box works on another TV: Roku suggests this test to tell whether the problem is the TV or the device.
  • The TV's own menu doesn't appear when you press Home (or Menu): Samsung says the TV may be having a power problem, and its last step is to request service.

When it's the service, not the TV

LG answers this exact question in its own FAQ: if there's no picture while the set-top box is on, unplug the power cord from the back of the box, wait five seconds, and plug it back in. If that doesn't fix it, LG says it might be a signal problem, and to call your service provider for a line check.

The same goes when only one channel says No Signal or Weak Signal. LG says your connection is likely fine in that case: the broadcaster's signal may be weak, or your provider may need to check the line.

What changes the steps

  • A soundbar or receiver in between. Roku says to plug the device straight into the TV, not through an audio/video receiver or soundbar, while you troubleshoot.
  • An antenna or a cable wire with no box. The TV has to scan for channels first. On an LG from 2021 or later: Settings > All Settings > General > Channels > Channel Tuning > Auto Tuning.
  • A streaming stick instead of a cable box. Roku says some players don't get enough power even when the light is on: use the power adapter that came with it, plugged into a wall outlet.

Our full guide to TV says no signal has the input button for every major brand, and step-by-step pages for LG, Samsung and Roku TVs, each with a short video of the steps. The free TV Fridge Card has a line to write down which HDMI port your box uses, so the next time it happens the answer is on the fridge.

Sources

Checked for accuracy
Published

How we check our guides

Know someone this would help?

Was this helpful?