Skip to the main content

Roku TV says No Signal: what to do

On a Roku TV, press Home and choose the cable box’s input tile, do a system restart, and Roku’s steps for sound but no picture, no sound and re-pairing the remote.

Reviewed by Erin ·Checked for accuracy 8 official sourcesHow we check

Quick answer

Press Home on the Roku remote, go down to Inputs, and choose the tile your cable box is plugged into, such as HDMI 1.

  1. Still No Signal? Push the HDMI cable all the way in, or try another port or cable.
  2. System restart: unplug the TV for at least 10 seconds. Your settings stay.
  3. Voice remote: hold the pairing button (or Back + Home) for 5 seconds after a restart.

Checked on Roku’s support site. These steps cover TVs with Roku built in, including Roku-made TVs; TCL, onn and Hisense also sell Roku TV models.

Menus move with software updates. If your screen doesn’t match, Roku’s own help page (linked under each set of steps) is the last word, and we re-check these steps every few days.

Watch it: 41-second video, captions on. Open on YouTube

Roku TV says No Signal

Try these in order and stop when it’s fixed.

Choose the cable box’s input on the Home screen

  1. Press Home on the Roku remote.
  2. Move down to Inputs.
  3. Highlight the input your cable or satellite box is plugged into, for example HDMI 1.
  4. Press OK.

Still No Signal? Roku says to make sure the HDMI cable is plugged all the way in at both ends and you chose the right input, then try a different HDMI port or cable.

Good to know

  • The Roku remote doesn’t control the cable box: use the box’s own remote for its channels.

Source: Roku, Roku: How to set up and watch cable or satellite TV on your Roku TV system, checked Nov 18

Do a system restart

It won’t change your settings. On a Roku TV it’s not the same as pressing the power button.

  1. Unplug the power cord for at least 10 seconds.
  2. Plug it back in and wait for the Home screen.

Or from the menu: press Home, then Settings , then System , then Power , then System restart (no Power item? go straight to System restart).

Source: Roku, Roku: How to system restart your Roku streaming device, checked Nov 18

Roku TV: sound but no picture

Try these in order and stop when it’s fixed.

Sound but no picture: turn it off and change outlets

  1. Turn the TV off with Power on the Roku remote or the TV’s own power button.
  2. Unplug the TV from its power source, including any power strip or extension cord.
  3. Plug it straight into a different wall outlet and turn it on.

Tip: On an outlet with Test and Reset buttons (a GFCI outlet), press Reset: power may have cut off in a surge or outage.

Good to know

  • If the TV still has sound and no picture after the factory reset below, contact the TV maker (Roku, for a Roku-made TV).

Source: Roku, Roku: Fix a Roku TV that will not power on or has no picture, checked Nov 18

Choose the cable box’s input on the Home screen: same steps as above, under Roku TV says No Signal: Choose the cable box’s input on the Home screen.

Do a system restart: same steps as above, under Roku TV says No Signal: Do a system restart.

Roku TV: no sound

Try these in order and stop when it’s fixed.

Check the volume, and the soundbar settings

  1. Turn the volume up and make sure mute is off.
  2. Using a soundbar? Make sure it’s plugged into the TV’s HDMI port labeled ARC or eARC.
  3. Press Home, then go to Settings , then System , then Control other devices (CEC) and check 1-touch play.
  4. Go to Settings , then Audio , then Audio Output and choose eARC.

A soundbar set to Bluetooth or an AUX input won’t play the TV’s sound: switch the soundbar to its HDMI input.

Sources: Roku (2 pages), checked Nov 18

Do a system restart: same steps as above, under Roku TV says No Signal: Do a system restart.

Roku TV remote not working

Try these in order and stop when it’s fixed.

Simple remote (no voice button): batteries and a clear path

A Roku simple remote uses infrared, so it has to point straight at the TV or player.

  1. Take out the old batteries.
  2. Press any two buttons to reset the remote.
  3. Put in a fresh matching pair of batteries.
  4. Make sure nothing blocks the front of the Roku TV or player, then try pointing from different angles.

Source: Roku, Roku: Fix your Roku remote (simple or voice), checked Nov 18

Voice remote: restart and pair it again

A voice remote has a microphone or magnifying-glass button and doesn’t need to point at the TV.

  1. Restart the remote: take both batteries out, press any two buttons, and put the batteries back in.
  2. Restart the Roku TV or player: unplug its power cord, wait at least 5 seconds, and plug it back in.
  3. When the Home screen appears, hold the pairing button (under the battery cover or on the back) for 5 seconds, until the remote’s light flashes.
  4. No pairing button? Hold Back and Home together for 5 seconds instead.
  5. Wait for the pairing message on the screen.

Pairing only works when the TV or player and the remote are both in pairing mode at the same time. While you sort it out, the free Roku mobile app works as a remote.

Sources: Roku (2 pages), checked Nov 18

Last resort

Factory reset the Roku TV

The last resort. It erases your preferences, unlinks the device from your Roku account and removes your apps.

  1. Have these ready first: your Roku account email and password, your Wi-Fi name and password, and the sign-ins for your streaming apps.
  2. Press Home on the Roku remote.
  3. Go to Settings , then System , then Advanced system settings , then Factory reset.
  4. Choose Factory reset everything.
  5. Follow the steps on screen.

Can’t reach the menu?

  • Some Roku TVs have a recessed Reset button on the back: hold it about 12 seconds with a paper clip.
  • Others reset by holding Power and Find My Remote for 12 seconds.
  • On a TV with no reset button, hold the TV’s own Power button for 10 seconds.
Sources: Roku (2 pages), checked Nov 18

Still not fixed? Roku support.

Questions people ask

My Roku TV has sound but no picture. What do I do?

Turn it off, unplug it from any power strip, and plug it straight into a different wall outlet. If it’s on an outlet with Test and Reset buttons, press Reset. If that fails, a factory reset is Roku’s next step.

Why doesn’t my Roku remote change the cable channels?

Roku says that’s normal: the Roku remote only controls the Roku TV. Use the cable box’s own remote for its channels.

How do I pair a Roku voice remote?

Restart the TV (unplug it at least 5 seconds), and when the Home screen appears hold the pairing button for 5 seconds (no button: Back + Home) until the light flashes. Both have to be in pairing mode at the same time.

Checked for accuracy
Updated

What changed: Added a short video of the steps, with captions.

Every step checked against Roku’s own instructions.

First published November 18, 2026.

Sources (8 pages)

Every step and price on this page comes from these official pages. All sources checked November 18, 2026.