Skip to the main content

Apple TV shows no picture or No Signal: what to do

Reseat the HDMI cable and choose the right TV input, reset the resolution, fix no sound, and pair or restart the Siri Remote, with Apple’s steps for Apple TV 4K and HD.

Reviewed by Erin ·Checked for accuracy 5 official sourcesHow we check

Quick answer

Unplug both ends of the HDMI cable and plug them back in firmly, then use the TV’s own remote to choose the Apple TV’s HDMI input.

  1. Restart: unplug the Apple TV’s power for 30 seconds, then plug it back in.
  2. Picture blank or flickering? Hold Menu (or Back) and Volume Down for 5 seconds to cycle resolutions.
  3. Remote not working? Hold Back and Volume Up for five seconds, three inches from the Apple TV.

Checked on Apple Support, for Apple TV 4K and Apple TV HD (tvOS). Apple notes where the 3rd-generation and older models differ.

Menus move with software updates. If your screen doesn’t match, Apple TV’s own help page (linked under each set of steps) is the last word, and we re-check these steps every few days.

No signal from Apple TV

Try these in order and stop when it’s fixed.

Check the HDMI cable and the TV’s input

  1. Unplug both ends of the HDMI cable, then plug them back in firmly.
  2. On the TV’s own remote or menu, choose the HDMI input that matches the port the Apple TV is plugged into.
  3. Try a different HDMI port on the TV, starting with HDMI 1 (or Input 1).
  4. Try a different HDMI cable: Apple says an Ultra High Speed cable for HDMI 2.1, or a Premium High Speed cable for HDMI 2.0.

Going through an HDMI switch or a receiver? Plug the Apple TV straight into the TV to see whether that box is the cause.

Source: Apple, Apple: If your Apple TV 4K or Apple TV HD isn’t working, won’t turn on, or shows a black screen, checked Nov 18

Check the power

  1. Unplug the power cord from the Apple TV.
  2. Wait 30 seconds, then plug it back in.
  3. Still nothing? Plug it into a different outlet, or try a different Apple TV power cord if you have one.

Source: Apple, Apple: If your Apple TV 4K or Apple TV HD isn’t working, won’t turn on, or shows a black screen, checked Nov 18

Apple TV: sound but no picture

Try these in order and stop when it’s fixed.

Check the HDMI cable and the TV’s input: same steps as above, under No signal from Apple TV: Check the HDMI cable and the TV’s input.

Picture blank or flickering: reset the resolution

  1. On the Apple TV remote, hold Menu (or Back) and Volume Down for 5 seconds.
  2. The Apple TV switches to a new resolution every 20 seconds.
  3. When the picture looks right, choose OK.

A blank or flickering screen when a show starts or stops can come from Match Dynamic Range or Match Frame Rate: check them under Settings , then Video and Audio , then Match Content. For an Apple TV (2nd or 3rd generation), hold Menu and Up instead.

Source: Apple, Apple: If your Apple TV 4K or Apple TV HD isn’t working, won’t turn on, or shows a black screen, checked Nov 18

Check the power: same steps as above, under No signal from Apple TV: Check the power.

Apple TV: no sound

Try these in order and stop when it’s fixed.

Picture but no sound

Apple’s steps, in order. Check whether the sound is back after each one.

  1. Unplug both ends of the HDMI cable, then plug them back in firmly.
  2. Turn off the TV and unplug the Apple TV from power. Plug the Apple TV back in, then turn the TV on.
  3. Using an HDMI switch or receiver? Plug the Apple TV straight into the TV.
  4. On the Apple TV, go to Settings , then Video and Audio , then Audio Format, turn on Change Format, and choose a different format.
  5. In Settings , then Video and Audio, set Audio Mode to 16 bit, and set Audio Output to Apple TV.

No sound only in the Apple TV’s menus? Turn on Sound Effects and Music under Settings , then Video and Audio.

Source: Apple, Apple: If your Apple TV has no sound, checked Nov 18

Apple TV remote not working

Try these in order and stop when it’s fixed.

Pair the remote again

  1. Point the remote at the Apple TV from about three inches away.
  2. Press and hold Back (or Menu) and Volume Up for five seconds.
  3. If asked, set the remote on top of the Apple TV to finish pairing.
  4. If it won’t pair, unplug the Apple TV, wait six seconds, plug it back in, and try again.

Source: Apple, Apple: If your Siri Remote or Apple TV Remote isn’t working, checked Nov 18

Still not working: restart the remote

  1. Press and hold the TV (Control Center) button and Volume Down together for about 5 seconds, until the Apple TV’s status light turns off and on again.
  2. Let go and wait 5 to 10 seconds.
  3. Press any button. A Remote Connected message means it works.

Tip: Apple also says to charge the remote for 30 minutes, stay within 20 feet, and keep the path to the Apple TV clear.

With a Siri Remote (4th generation): the Apple TV needs tvOS 26.6.1 or later: check Settings , then General , then About.

Meanwhile: the Apple TV Remote on an iPhone or iPad works.

Source: Apple, Apple: If your Siri Remote or Apple TV Remote isn’t working, checked Nov 18

Last resort

Restart, then reset the Apple TV

Try a restart first: Settings , then System , then Restart, or unplug it for five seconds. A reset is the last resort: it erases the Apple TV and everything on it, and you set it up again.

  1. On the Apple TV, go to Settings , then System , then Reset.
  2. Choose Reset (the fastest, no internet needed) or Reset and Update.
  3. Keep the Apple TV plugged in until it finishes.
Sources: Apple (2 pages), checked Nov 18

Still not fixed? Apple TV support.

Questions people ask

How do I fix my Apple TV remote?

Point it at the Apple TV from about three inches away and hold Back (or Menu) and Volume Up for five seconds. If it won’t pair, unplug the Apple TV, wait six seconds, and try again. Or restart the remote: hold TV and Volume Down about 5 seconds.

Why is there no sound from my Apple TV?

Reseat the HDMI cable, power cycle the TV and Apple TV, then in Settings , then Video and Audio turn on Change Format under Audio Format and pick a different format, or set Audio Mode to 16 bit.

Which HDMI cable does Apple TV need?

Apple says an Ultra High Speed HDMI cable for HDMI 2.1, or a Premium High Speed HDMI cable for HDMI 2.0.

Checked for accuracy
Published

Every step checked against Apple TV’s own instructions.

Sources (5 pages)

Every step and price on this page comes from these official pages. All sources checked November 18, 2026.