Skip to the main content

No signal from your Google TV Streamer or Chromecast: what to do

Plug it into the wall with its own adapter, switch the TV to its HDMI input, reboot it for a minute, and Google’s steps for no sound and a voice remote that won’t work.

Reviewed by Erin ·Checked for accuracy 5 official sourcesHow we check

Quick answer

Plug the device into a wall outlet with the cord and adapter it came with, and set the TV to its HDMI input.

  1. Reboot: unplug its power cord (not the HDMI end) for one minute.
  2. Still black? Unplug every HDMI device and the TV’s power for 30 minutes.
  3. Remote: take the batteries out and put them back in; the light should flash twice.

Checked on Google’s Streaming Help pages for the Google TV Streamer (4K) and Chromecast with Google TV.

Menus move with software updates. If your screen doesn’t match, Google’s own help page (linked under each set of steps) is the last word, and we re-check these steps every few days.

No signal from your Google TV Streamer or Chromecast

Try these in order and stop when it’s fixed.

Check its power and the TV’s input

  1. Plug the streaming device straight into a wall outlet, with the power cord and adapter that came with it.
  2. Set the TV to the HDMI input the device is plugged into, for example HDMI 1 or HDMI 2, with the TV’s own remote.

Source: Google, Google Streaming Help: TV has no signal or only shows a black screen, checked Nov 18

Reboot the streaming device

  1. Unplug the device’s power cord (not the HDMI end at the TV).
  2. Wait one minute.
  3. Plug the power cord back in.

Google notes that pulling it out of the TV’s HDMI port doesn’t reboot it: it has to lose power. If the screen works, you can restart from the menu: at the top right, Settings , then System , then Restart.

Sources: Google (2 pages), checked Nov 18

Check the HDMI connection

  1. Make sure the device (or its HDMI cable) is pushed firmly into the TV’s HDMI port.
  2. Try a different HDMI input on the TV, then switch the TV to that input.
  3. Going through a soundbar, receiver or HDMI switch? Plug the device straight into the TV instead.

Samsung TV losing the picture for a few seconds at a time? Google says to turn off the TV’s HDMI UHD Color setting.

Source: Google, Google Streaming Help: TV has no signal or only shows a black screen, checked Nov 18

Still black: power down the TV

  1. Unplug every HDMI device from the TV.
  2. Unplug the TV’s power cord for 30 minutes.
  3. Plug the TV back in, then plug the streaming device back in and choose its input.

If you have another TV, try the streaming device there: if it works, the first TV or its port is the problem.

Source: Google, Google Streaming Help: TV has no signal or only shows a black screen, checked Nov 18

Your Google TV Streamer or Chromecast: sound but no picture

Try these in order and stop when it’s fixed.

Check its power and the TV’s input: same steps as above, under No signal from your Google TV Streamer or Chromecast: Check its power and the TV’s input.

Reboot the streaming device: same steps as above, under No signal from your Google TV Streamer or Chromecast: Reboot the streaming device.

Check the HDMI connection: same steps as above, under No signal from your Google TV Streamer or Chromecast: Check the HDMI connection.

Still black: power down the TV: same steps as above, under No signal from your Google TV Streamer or Chromecast: Still black: power down the TV.

Your Google TV Streamer or Chromecast: no sound

Try these in order and stop when it’s fixed.

Set the sound format to Automatic (Google TV Streamer)

If a fixed format like Dolby Digital or PCM stereo is chosen, Google says the TV, receiver or soundbar has to support it too.

  1. At the top right of the TV screen, go to All Settings.
  2. Choose Display & Sound , then Audio options , then Output format.
  3. Choose Automatic.
  4. If the change doesn’t take, unplug the Streamer from power for 1 minute, then plug it back in.

Source: Google, Google Streaming Help: Sound settings for Chromecast with Google TV and Google TV Streamer, checked Nov 18

Plug it straight into the TV, not the soundbar

A receiver or soundbar between the streaming device and the TV can cause delays and block the TV’s HDMI controls.

  1. Unplug the Google TV device from the receiver or soundbar.
  2. Plug it into a free HDMI port on the TV.
  3. Plug the soundbar into the TV’s HDMI port labeled eARC or ARC, so the TV passes the sound on.
  4. In the TV’s settings, make sure HDMI CEC is on (it may be called Bravia Sync, Anynet+ or SimpLink), and on the soundbar too.

Source: Google, Google TV Help: Fix slow startup & audio issues on Google TV streaming devices, checked Nov 18

Reboot the streaming device: same steps as above, under No signal from your Google TV Streamer or Chromecast: Reboot the streaming device.

Your Google TV Streamer or Chromecast remote not working

Try these in order and stop when it’s fixed.

Check the remote’s batteries

The remote’s light is unmarked, on the front below the buttons, and only shows when it lights up.

  1. Take both batteries out of the remote.
  2. Put them back in while watching the remote’s light: it should flash twice.
  3. No double flash? Put in fresh AAA batteries (1.5 volt) and watch again.
  4. Still nothing? Take the batteries out, wait 5 minutes, and put them back in.

Source: Google, Google Streaming Help: Troubleshoot the Chromecast or Google TV Voice Remote, checked Nov 18

Reboot, then pair the remote again

  1. Reboot the streaming device: unplug its power for one minute, then plug it back in.
  2. Set up your phone as a virtual remote, and use it to move around the TV screen.
  3. On the TV, go to your profile › Settings , then Remotes & Accessories.
  4. Choose Voice Remote , then Forget , then Yes.
  5. Put the remote in pairing mode:
    • Chromecast Voice Remote: take the batteries out, wait 5 minutes, then put them back in while holding Home. Let go when the light starts to pulse.
    • Google TV Streamer remote: hold Mute and the center (Select) button together until the light turns solid white (it usually takes no more than 12 seconds).
  6. If it doesn’t pair on its own, hold Back and Home for 3 seconds.

Source: Google, Google Streaming Help: Troubleshoot the Chromecast or Google TV Voice Remote, checked Nov 18

Last resort

Factory reset the streaming device

Google calls this the last step. It clears your data and can’t be undone: you’ll set the device up again and reconnect it to Wi-Fi.

  1. With the remote: at the top right of the TV screen, choose your profile › All settings.
  2. Choose System , then About , then Factory Reset.

No remote? With the device plugged in and on, press and hold the button on its back until the light blinks yellow, then turns solid white. Let go.

Source: Google, Google Streaming Help: TV has no signal or only shows a black screen, checked Nov 18

Still not fixed? Google’s Streaming Help.

Questions people ask

Why does my TV say No Signal with my Chromecast?

Google’s first checks: the device is plugged into the wall with its own adapter, and the TV is on the HDMI input it’s plugged into. Then reboot it by unplugging the power for a minute.

Why is my Google TV remote not working?

Take both batteries out and put them back in while watching the remote’s light: it should flash twice. If not, try fresh batteries, then reboot the device, forget the remote in Remotes & Accessories, and reset the remote.

Does unplugging Chromecast from the TV restart it?

No. Google says it has to lose power: unplug the power cord, not the HDMI end.

Checked for accuracy
Published

Every step checked against Google’s own instructions.

Sources (5 pages)

Every step and price on this page comes from these official pages. All sources checked November 18, 2026.