Skip to the main content

LG TV says No Signal: what to do

Press Input (or hold Home Hub) and pick your box’s HDMI port, restart the set-top box, and LG’s steps for no sound, Magic Remote pairing and a reset, by webOS version.

Reviewed by Erin ·Checked for accuracy 4 official sourcesHow we check

Quick answer

Press Input on the LG remote (no Input button? press and hold Home Hub) and choose the HDMI port your cable box is plugged into.

  1. The box’s light: make sure it’s on. If it isn’t, unplug the box for about five seconds.
  2. The HDMI cable: reconnect it at both ends, or move it to another HDMI port.
  3. Magic Remote not working? Hold Back and Settings for 5 seconds, then press the scroll wheel to pair again.

Checked on LG’s US help library. Menus are for LG webOS TVs; LG notes they may vary by model.

Menus move with software updates. If your screen doesn’t match, LG’s own help page (linked under each set of steps) is the last word, and we re-check these steps every few days.

Watch it: 40-second video, captions on. Open on YouTube

LG TV says No Signal

Try these in order and stop when it’s fixed.

Make sure the cable box is on

LG’s first check: the TV is on but the set-top box (cable or satellite box) is off or stuck.

  1. Look at the light on the front of the set-top box. It should be on.
  2. Press Power on the set-top box remote. If that remote doesn’t respond, press the power button on the box itself.
  3. If the light stays off or the box doesn’t respond, unplug the box’s power adapter from the wall.
  4. Wait about five seconds, then plug it back in.

Source: LG, LG: If Your LG TV Displays a No Signal Message, checked Nov 18

Choose the input your box is plugged into

LG’s example of the mix-up: the box is plugged into one HDMI port and the TV is set to another (the cable is in HDMI 1, but the TV is on HDMI 2).

  1. Press Input on your LG remote. If your remote has no Input button, press and hold the Home Hub button.
  2. From the list on the screen, choose the HDMI port your box is plugged into.
  3. Check that live TV and the right channel number appear.

On LG’s 2020 and 2021 Magic Remotes the button is called External Input.

Sources: LG (2 pages), checked Nov 18

Reconnect the HDMI cable, or try another port

  1. Unplug the HDMI cable from the TV and from the box.
  2. Clear any dust or debris around the TV’s HDMI port.
  3. Plug the cable back in firmly at both ends.
  4. If the TV has another HDMI port free, move the cable there, then choose that input with Input.

Source: LG, LG: If Your LG TV Displays a No Signal Message, checked Nov 18

Antenna or cable wire straight into the TV? Run Auto Tuning

Only if there’s no box: the antenna or coaxial cable plugs right into the TV.

  1. Press the Settings button (the gear) on your remote.
  2. Choose Auto Tuning for your TV:
    • TVs from 2021 or later (webOS 6.0 or later): All Settings , then General , then Channels , then Channel Tuning , then Auto Tuning
    • TVs from 2020 or earlier (webOS 5.0 or earlier): All Settings , then Channels , then Channel Tuning , then Auto Tuning

Not sure which webOS you have? Press Settings or Mute three times in a row.

Good to know

  • If only one channel says No Signal, your connection is likely fine: the broadcaster’s signal may be weak, or your provider may need to check the line.

Source: LG, LG: If Your LG TV Displays a No Signal Message, checked Nov 18

LG TV: sound but no picture

Try these in order and stop when it’s fixed.

Choose the input your box is plugged into: same steps as above, under LG TV says No Signal: Choose the input your box is plugged into.

No picture with the box on: restart the box

  1. Unplug the power cord from the back of the set-top box.
  2. Wait five seconds.
  3. Plug it back in and wait for it to start up.

Still no picture? LG says it may be a signal problem: call your cable or satellite company and ask for a line check.

Source: LG, LG: If Your LG TV Displays a No Signal Message, checked Nov 18

Reconnect the HDMI cable, or try another port: same steps as above, under LG TV says No Signal: Reconnect the HDMI cable, or try another port.

LG TV: no sound

Try these in order and stop when it’s fixed.

Send the sound to the TV’s speakers

If a soundbar was unplugged recently, the TV may still be sending its sound there.

  1. Press the Settings button (the gear) on your remote.
  2. Choose All Settings , then Sound , then Sound Out.
  3. Choose TV Internal Speaker (or your soundbar, if that’s what you listen through).

Source: LG, LG: What to check if your LG TV has no sound, checked Nov 18

Check the box’s volume and its HDMI cable

  1. Turn the volume up with the TV remote and with the cable box remote: the box can be muted on its own.
  2. Unplug both ends of the HDMI cable between the TV and the box, then plug them back in.
  3. Unplug the power cords of the TV and the box, then plug them back in.

A different HDMI cable may also help.

Source: LG, LG: What to check if your LG TV has no sound, checked Nov 18

Run LG’s sound test

It plays a test sound so you know whether the TV’s speakers work.

  1. Press the Settings button (the gear) on your remote, then choose All Settings.
  2. Choose the sound test for your TV:
    • TVs from 2021 or later (webOS 6.0 or later, and OLED TVs from 2024): Support , then Sound Self-Diagnosis
    • OLED TVs from 2021 to 2023: General , then OLED Care , then Device Self-Care , then Sound Self-Diagnosis
    • 2020 TVs (webOS 5.0): Support , then Additional Settings , then Sound Test
    • 2019 or earlier: Sound , then Sound Test

Test sound plays but the cable box is silent? LG says the TV is fine: unplug the box’s power cord, plug it back in, and call your provider if it’s still silent.

No test sound at all? Contact LG.

Source: LG, LG: What to check if your LG TV has no sound, checked Nov 18

LG TV remote not working

Try these in order and stop when it’s fixed.

Re-pair the Magic Remote

If the pointer doesn’t appear on screen, LG says the remote has likely lost its connection to the TV.

  1. Turn on the TV and wait about 20 seconds.
  2. Point the remote at the TV and press the scroll wheel. A message on screen says it’s paired.
  3. Still not working? Press and hold Back and Settings together for at least 5 seconds, until the remote’s light blinks and an unpairing message appears.
  4. Press the scroll wheel (OK) to pair it again.

LG’s next step: on models from 2021 and 2025, point the remote at the TV and hold Home and Settings together for at least 5 seconds until instructions appear; on 2020 models, hold Guide.

Source: LG, LG: How to fix LG Magic Remote connection and voice recognition issues, checked Nov 18

Last resort

Reset the TV to factory settings

Only after everything above. A reset deletes your saved settings, account information and downloaded apps; afterward you set the TV up again and sign back in to each app, such as Netflix and YouTube.

  1. Press Settings (the gear) on the remote.
  2. Choose Reset to Initial Settings for your TV:
    • 2026 or later TVs (webOS 26 or later): All Settings , then System , then Reset to Initial Settings
    • 2021 to 2025 TVs (webOS 6.0 through 25): All Settings , then General , then System , then Reset to Initial Settings
    • 2020 TVs (webOS 5.0): All Settings , then Support , then Reset to Initial Settings
    • 2019 or earlier: All Settings , then General , then Reset to Initial Settings
  3. Choose Reset All. (Some 2024 and newer models also offer Reset All Except Network Settings, which keeps your Wi-Fi.)

Asked for a password? The default is 0000. If that doesn’t work, it was changed, and LG’s support can help.

Source: LG, LG: How to Reset Your LG TV to Factory Settings, checked Nov 18

Still not fixed? LG’s TV support.

Questions people ask

Why does my LG TV say No Signal?

LG lists four reasons: the set-top box is off, a cable is loose or a port is damaged, the TV is on a different input than the box (for example, the box is in HDMI 1 and the TV is on HDMI 2), or, with an antenna, Auto Tuning hasn’t been run.

Why is there no sound on my LG TV?

Check Sound Out: if a soundbar was unplugged, the TV may still be sending sound to it. Then turn up the cable box’s own volume, and run Sound Self-Diagnosis to test the speakers.

How do I pair my LG Magic Remote?

Turn on the TV, wait about 20 seconds, point the remote at the TV and press the scroll wheel. If that doesn’t work, hold Back and Settings for 5 seconds to unpair, then press the wheel again.

How do I find my LG TV’s webOS version?

Press the Settings (gear) button or the Mute button on the remote three times in a row. The menus on this page depend on it.

Checked for accuracy
Updated

What changed: Added a short video of the steps, with captions.

Every step checked against LG’s own instructions.

First published November 18, 2026.

Sources (4 pages)

Every step and price on this page comes from these official pages. All sources checked November 18, 2026.